MI360 Mirror Adhesive
Mirror Adhesive
A neutral adhesive that protects the mirror backing.
One-part, neutral-cure formula that is gentle on mirror coatings. Low odor with a strong, elastic and durable bond; will not corrode the mirror backing and no black edge forms.
Package: 300 ml/cartridge, 24 cartridges per carton · Type: Neutral-cure mirror adhesive
Cure systemOne-component neutral RTV
Packaging300 ml cartridge
StandardJC/T 485-2007, type SR 2 MG A K
ColorsClear / White
Product overview
A mirror-safe bond for walls and decorative panels.
MI360 is a one-part, neutral-cure adhesive intended for wall mounting of bathroom, dressing and decorative mirrors, composite bonding of mirrors to wood, gypsum and tile, and assisted bonding of large mirrors that need mechanical fixing. Confirm the mirror coating and wall condition before specification.
- One-part, neutral-cure formula that is gentle on mirror coatings.
- Low odor with a strong, elastic and durable bond.
- Will not corrode the mirror backing; no black edge forms.
- Bonds mirrors to walls and a variety of substrates.
Typical Applications
Technical data
Core data for product screening.
All values are typical results for this neutral-cure mirror adhesive, tested to JC/T 485-2007 at grade 2 (SR 2 MG A K). Every figure listed meets the limit for that class.
| Property | Typical value | Requirement · JC/T 485-2007 |
|---|---|---|
| Appearance | Smooth, uniform transparent paste | No lumps, gel, skin or exudate |
| Density | 0.97 g/cm³ (declared) | Within ±0.1 g/cm³ of declared value |
| Extrudability | 556 mL/min | ≥ 50 mL/min, measured at 5 °C (A-type) |
| Tack-free time | 0.5 h | ≤ 72 h |
| Slump, vertical | 0 mm | ≤ 2 mm |
| Slump, horizontal | 0 mm | ≤ 2 mm |
| Tensile modulus (M and G class) | 0.52 MPa | ≤ 0.60 MPa |
| Extension after heat–water cycling | 60 %, no failure | 60 % extension, no failure |
| Extension after water–UV exposure | 60 %, no failure | 60 % extension, no failure |
| Low-temperature flexibility | −20 °C, no cracking | −20 °C, no cracking or delamination |
| Elastic recovery after heat–water cycling | 97 % (M) / 96 % (G) | ≥ 30 % |
| Tensile–compressive cycling, durability grade | 7020 | Grade 2: 8020 or 7020 |
| Tensile–compressive cycling, adhesion failure area | 0 % | ≤ 25 % |
Durability grade reads as test temperature and joint movement: 7020 means 70 °C with ±20 % movement. Extrudability is measured at 5 °C because this is an all-season (A-type) product. Density uses the metal-frame method per GB/T 13477.2, and values were determined on a clear sample — request white-specific data for white. Typical values, not a guarantee for every batch or substrate.
A practical five-step application summary.
- Wall and mirror back must be clean, dry, flat and sound.
- Apply in dots or beads; add mechanical fixings for large mirrors.
- Press and align; adjust before skin formation.
- Avoid movement or load before full cure.
- Apply a moisture barrier on damp walls first.
Technical documents
Review the documents behind MI 360.
View or download the current MI 360 Technical Data Sheet, request the applicable Safety Data Sheet, or ask us to verify product compatibility, packaging and sample requirements for your application.
Ready to check if MI360 fits your project?
Share the mirror coating, wall substrate, mirror size, fixing method, color, quantity and destination market. Our team will confirm whether MI360 fits before quotation.
Include in Your Inquiry1. Mirror coating and wall substrate2. Mirror size and fixing method3. Color and package requirements4. Quantity and destination market